HOW IT WORKS
Industries
MARITIME
Geothermal
STEEL PLANTS
CEMENT PLANTS
GENSETS
OTHER INDUSTRIES
PUBLIC REFERENCE CUSTOMERS
Insights
Investor
Investor Swedish
Investor English
About Climeon
Careers
☰ MENU
CONTACT US
WANT TO SAVE THE WORLD?
We are happy that you’re interested in our heat power modules and our climate work.
In order to help you find the best solution, we would like you to answer some questions. They will help us determine how we can help you the best.
We have four categories: Geothermal, Maritime, industrial and other industries.
If you have any other query, please pick "general".
Right solution for you
If you are human, leave this field blank.
Name
*
Company
*
Company Location
*
E-mail
*
Phone
*
I am interested in:
*
Geothermal
Maritime
Industrial
Other industries
General
Geothermal Questionaire
Where will the power plant(s) be located (country, region)?
Are there existing wells you will use?
Yes
No
I don't know
What is the hot water flow (in liters per second)?
(Recommended minimum: 10l/s)
What is the hot water temperature (in Celsius)?
(Recommended minimum: 70-120°c)
What is the hot water availability in hours?
Please write your estimation in % hourly per year.
Is there a cold water source available?
Yes
No
I don't know
What is the cold water flow (in liters per second)?
(Recommended minimum: 10l/s)
What is the cold water temperature (in Celsius)
(Recommended minimum: 0-30°c)
What is the annual average ambient temperature in Celsius (if cooling is not available)?
What is the electricity price per Mwh in the country/region?
What voltage (V) do you use?
What frequency (Hz) do you use?
Message
Maritime Questionaire
How many engines run during normal operation?
What is the engine power output in MW?
What is the engine load during normal operation?
(Write in percentage %)
What is the HT/Jacker water outlet temperature (in Celsius)?
What is the HT/Jacket water flow?
Please write in one of the following unit: liters per second (l/s), cubic meters per hour (Nm³/h), gallon per minute (gpm)
What is the HT/Jacket water excess heat (MW)?
What is the required HT/Jacker water return temperature (in Celsius)?
What are the steam conditions during normal operation (temperature/ pressure/ amount)
What is the amount of excess steam (MW)?
What is the exhaust gas temperature (in Celsius)?
What is the exhaust gas flow (m³/h)?
What is the average sea water temperature (in Celsius)?
What fuel are you using?
What is the SFOC of the vessel?
Which Classification Society does the vessel have?
Message
Industrial Questionaire
Industrial refers to Steel, Refinery, Metal processing, Pulp and Paper, Gensets etc
Where is your industry located (country, region)?
What type of waste heat source is available? (flue gases, gen set jacket cooling, hot air, etc)?
In what form? (water, air stream, oil, etc)?
What is the heat source temperature (in Celsius)?
What is the flow rate of the heat source (Nm³/h)?
Does the heat load vary over time or is it constant?
What is the yearly uptime of the heat source (% hours/year)?
Is there an existing cooling source?
Yes
No
I don't know
What is the flow rate of the cooling source (Nm³/h)?
What is the cooling source temperature (in Celsius)?
Are there any temperature limits (upper or lower) for the hot or cold source?
Is the waste heat utilized in other ways? (heating of the buildings, drying material, preheating etc)?
What is the electricity price per kWh?
Are there any existing subsidies or feed in tariffs?
Are there other waste heat recovery solutions implemented?
Yes
No
I don't know
Message
Other industries
Other refers to Heat and power plant, Genset power plant and micro grids etc
What is the intended use for the heat power modules?
Where is your industry located (country, region)
What type of waste heat source is available? (flue gases, gen set jacket cooling, hot air etc)?
In what form? (water, air stream, oil, etc)?
What is the heat source temperature (in Celsius)?
(Recommended minimum: 70-120°c)
What is the flow rate of the heat source (Nm³/h)?
Does the heat load vary over time or is it constant?
What is the yearly uptime of the heat source (hours/year)?
Is there an existing cooling source?
Yes
No
I don't know
If so, what is the cooling source temperature (in Celsius)?
(Recommended minimum: 0-30°c)
What is the flow rate of the cooling source (Nm³/h)?
Are there any temperature limits (upper or lower) for the hot or cold source?
Are there other waste heat recovery solutions implemented?
Is the waste heat utilized in other ways? (heating of the buildings, drying material, pre heating etc)?
Message
General
Message
By using this form, I give consent to marketing communication and have read and understand that my personal data will be handled in accordance with the
privacy policy
Submit
